|国家预印本平台
首页|Do We Still Need to Work on Odometry for Autonomous Driving?

Do We Still Need to Work on Odometry for Autonomous Driving?

Do We Still Need to Work on Odometry for Autonomous Driving?

来源:Arxiv_logoArxiv
英文摘要

Over the past decades, a tremendous amount of work has addressed the topic of ego-motion estimation of moving platforms based on various proprioceptive and exteroceptive sensors. At the cost of ever-increasing computational load and sensor complexity, odometry algorithms have reached impressive levels of accuracy with minimal drift in various conditions. In this paper, we question the need for more research on odometry for autonomous driving by assessing the accuracy of one of the simplest algorithms: the direct integration of wheel encoder data and yaw rate measurements from a gyroscope. We denote this algorithm as Odometer-Gyroscope (OG) odometry. This work shows that OG odometry can outperform current state-of-the-art radar-inertial SE(2) odometry for a fraction of the computational cost in most scenarios. For example, the OG odometry is on top of the Boreas leaderboard with a relative translation error of 0.20%, while the second-best method displays an error of 0.26%. Lidar-inertial approaches can provide more accurate estimates, but the computational load is three orders of magnitude higher than the OG odometry. To further the analysis, we have pushed the limits of the OG odometry by purposely violating its fundamental no-slip assumption using data collected during a heavy snowstorm with different driving behaviours. Our conclusion shows that a significant amount of slippage is required to result in non-satisfactory pose estimates from the OG odometry.

Cedric Le Gentil、Daniil Lisus、Timothy D. Barfoot

自动化技术、自动化技术设备计算技术、计算机技术

Cedric Le Gentil,Daniil Lisus,Timothy D. Barfoot.Do We Still Need to Work on Odometry for Autonomous Driving?[EB/OL].(2025-05-07)[2025-05-22].https://arxiv.org/abs/2505.04438.点此复制

评论