Structural design and analysis of the primary mirror cell truss for a next-generation large spectroscopic survey telescope
Structural design and analysis of the primary mirror cell truss for a next-generation large spectroscopic survey telescope
Jinrui Guo 1Heng Zuo 2Pengchuan Li1
作者信息
- 1. Nanjing Institute of Astronomical Optics & Technology, Chinese Academy of Sciences, Nanjing 210042, China;CAS Key Laboratory of Astronomical Optics & Technology, Nanjing Institute of Astronomical Optics & Technology, Nanjing 210042, China;University of Chinese Academy of Sciences, Beijing 100049, China
- 2. Nanjing Institute of Astronomical Optics & Technology, Chinese Academy of Sciences, Nanjing 210042, China;CAS Key Laboratory of Astronomical Optics & Technology, Nanjing Institute of Astronomical Optics & Technology, Nanjing 210042, China
- 折叠
摘要
To meet the stringent requirements of the Extremely Large Spectroscopic Survey Telescope (ESST) primary mirror cell truss in terms of weight, stiffness, and thermal stability, this study proposes a three-layer spatial truss structure for the primary mirror support system. A hybrid material strategy is developed to achieve an optimal balance between structural rigidity and cost efficiency. The optimization objectives are defined as maintaining the total structural mass below 16 t while minimizing the displacement at the segment support points. The results show that an all-steel design limits the maximum support deformation to 0.518 mm, with a material cost of 1.92 million CNY. By incorporating 0.89% carbon fiber reinforced polymer (CFRP), the maximum deformation is reduced to 0.49 mm, with a material cost of 2.016 million CNY, thereby satisfying the ESST performance criteria. This study provides a cost-effective structural design solution for the next-generation large spectroscopic survey telescope in China.
Abstract
To meet the stringent requirements of the Extremely Large Spectroscopic Survey Telescope (ESST) primary mirror cell truss in terms of weight, stiffness, and thermal stability, this study proposes a three-layer spatial truss structure for the primary mirror support system. A hybrid material strategy is developed to achieve an optimal balance between structural rigidity and cost efficiency. The optimization objectives are defined as maintaining the total structural mass below 16 t while minimizing the displacement at the segment support points. The results show that an all-steel design limits the maximum support deformation to 0.518 mm, with a material cost of 1.92 million CNY. By incorporating 0.89% carbon fiber reinforced polymer (CFRP), the maximum deformation is reduced to 0.49 mm, with a material cost of 2.016 million CNY, thereby satisfying the ESST performance criteria. This study provides a cost-effective structural design solution for the next-generation large spectroscopic survey telescope in China.关键词
ESST/Primary mirror truss/OptimizationKey words
ESST/Primary mirror truss/Optimization引用本文复制引用
Jinrui Guo,Heng Zuo,Pengchuan Li.Structural design and analysis of the primary mirror cell truss for a next-generation large spectroscopic survey telescope[EB/OL].(2026-11-18)[2026-11-19].https://chinaxiv.org/abs/202611.00188.学科分类
天文学