基于动子凸极跟踪的磁通切换永磁直线电机无位置传感器仿真研究
Simulation of Sensorless Control For FSPMLM Based On mover Saliency-Tracking
本文首先从分析磁通切换直线电机(FSPMLM)的结构特点出发,在验证其结构凸极性的基础上,研究了一种基于脉振高频电压注入的低速无位置传感器控制方法,该方法是在估计的两相旋转坐标系的直轴上持续注入高频电压信号,通过检查电流环调节器输出的交轴电流,并对其进行适当的信号处理,从中提出转子位置估计误差的信息,对此误差值进行调节,可以获得转子位置与转速的估计值。同时,针对无位置传感器FSPMLM起动困难的问题,改进了一种初始位置估计方法,先注入高频信号检测磁极位置,再注入等宽脉冲电压矢量来判断磁极极性。最后搭建了FSPMLM和控制系统的仿真模型,其仿真结果验证了研究方法的可行性和有效性,非常适合于FSPMLM无位置传感器的应用。。
his paper researches a sensorless control method of flux-switching permanent linear magnet with high-frequency signal injection on the basis of salient pole verification, through the analysis of FSPMLM structure. A high frequency sinusoidal voltage signal is superimposed into the estimated d-axis, and the mover position can be demodulated after q-axis current is regulated, which is relative to error angle. Ultimately the mover position and speed can be obtained exactly. The paper also contributes to an improved magnetic pole identification based on space vector pulse width modulation for and arbitrary initial position to resolve starting problem of IPMSM. At last, the simulation model of FSPMLM and control system are constructed and all results of simulation demonstrate the accuracy and effectiveness of the presented approach, this method is well suitable for the application.
徐鸣飞、胡敏强、孟高军
电机
磁通切换直线电机无位置传感器高频注入法磁极判断
flux-switching permanent linear magnet motor (FSPML-M) sensorless drive high-frequency signal injection method N/S polarity determination
徐鸣飞,胡敏强,孟高军.基于动子凸极跟踪的磁通切换永磁直线电机无位置传感器仿真研究[EB/OL].(2015-12-11)[2025-08-02].http://www.paper.edu.cn/releasepaper/content/201512-646.点此复制
评论