基于Pro/Toolkit的工程图快速出图研究
he Research of Rapid Plotting Based on Pro/Toolkit
本文讨论了在保证工程图视图与零件实际尺寸比例为1:1时，通过定制工程图模板,通过Pro/Toolkit对CREO 2.0进行二次开发,使CREO 2.0能够快速生成符合国标要求的工程图。开发的程序能够根据工程图中各视图大小和间距修改工程图图幅的尺寸，并在工程图中按照国标要求重绘图框、插入标题栏等。并针对工程图开发了基本符号标注，具体的有粗糙度符号标注、形位公差标注和焊接符号标注等。?????
he article discusses how to quickly show engineering drawing by customizing templates and program,in which the view of the main view engineer drawing ratio is 1:1.In the drawing, the project map sheet sizes is modified according to the size of the view.In the drawing, in accordance with the national standard drawing box, insert the title bar, etc.Developing the basic symbol label for drawings,specifically,the roughness symbol mark, geometric tolerancing and welding symbols,etc.
李国宏、董玉德、陶高周、孟庆当、杨帆、曹银凤、房玉强、刘靓
机械设计、机械制图
1:1Pro/Toolkit二次开发REO 2.0工程图
1:1pro/toolkitsecondary developmentcreo 2.0drawing
李国宏,董玉德,陶高周,孟庆当,杨帆,曹银凤,房玉强,刘靓.基于Pro/Toolkit的工程图快速出图研究[EB/OL].(2015-05-19)[2025-08-16].http://www.paper.edu.cn/releasepaper/content/201505-231.点此复制
评论