|国家预印本平台
首页|分块选择重传的LDPC码混合自动重传请求协议设计

分块选择重传的LDPC码混合自动重传请求协议设计

Strategy Design for LDPCC-HARQ Using Segment Selective Repeat

中文摘要英文摘要

提出了一种分块选择重传(SSR)的LDPC码混合自动重传请求(LDPCC-HARQ)协议设计。根据LDPC码译码失败后错误码字的位置分布与译码器输入的对数似然比之间关系的统计特性,将接收码字依据信道条件分块并选择受信道损害最严重的若干块进行重传。仿真结果表明,SSR-HARQ协议与传统整包重传的WPR-HARQ协议相比,在降低误码率、改善译码性能的同时提高了传输效率,另外在硬件实现中不消耗更多的存储器资源。SSR-HARQ协议适用于含有突发错误并对误码率控制要求很高的信道环境。

Segment selective repeat (SSR) is proposed as a novel retransmission strategy for low destiny parity check codes hybrid automatic repeat request (LDPCC-HARQ). According to the statistical characteristic of relationship between error bits distribution and log-likelihood ratio (LLR) value, each receiving packet is divided into segments of equal length based on channel conditions and only segments estimated the worst corruption are to be retransmitted. The simulation results show that SSR-HARQ strategy outperforms traditional whole packet retransmission (WPR) strategy in bit error rate control and thus increases throughput without costing more storage resources in hardware implementation. SSR-HARQ strategy is applied for channel conditions producing burst errors in clusters and having extreme bit error requirement.

赵岭、刘荣科、智钢

通信无线通信

LDPC码混合自动重传请求分块选择重传译码性能

LDPC code HARQ Segment Selective repeat decoding performance

赵岭,刘荣科,智钢.分块选择重传的LDPC码混合自动重传请求协议设计[EB/OL].(2007-10-15)[2025-08-10].http://www.paper.edu.cn/releasepaper/content/200710-199.点此复制

评论