利用VB实现钢丝绳断丝信号的采集
Using VB to realize the broken wire rope signal acquisition
本论文主要阐述了以VB6.0为软件开发平台来实现单根钢丝绳断丝信号的采集与波形实时显示功能。VB6.0提供了丰富的控件，首先利用它提供的MSComm控件可以将钢丝绳的断丝信号从单片机中采集到上位机中，然后再利用Line控件将采集到的信号绘制成曲线。本次试验中该方法有效地实现了信号的采集，而且信号曲线偏差很小。
his paper mainly expound the single rope broken wire signal acquisition and real-time waveform display by use of the VB6.0 software development platform. VB6.0 have rich controls, firstly broken wire signal can be collected by MSComm control from the microcontroller to the host computer, and then the signal curve will be drawed up by Line control. This method of the test can effectively achieve the signal acquisition, and signal curve deviation is small.
陈娟、周义仁、张海涛、薛亚亭
电子技术应用计算技术、计算机技术
钢丝绳断丝VB6.0MSComm控件
wire ropebroken wireVB6.0MSComm control
陈娟,周义仁,张海涛,薛亚亭.利用VB实现钢丝绳断丝信号的采集[EB/OL].(2011-03-23)[2025-08-10].http://www.paper.edu.cn/releasepaper/content/201103-935.点此复制
评论