|国家预印本平台
首页|基于FPGA及AD9957的高速跳频发射机设计

基于FPGA及AD9957的高速跳频发射机设计

High-Speed frequency hopping transmitter design based on FPGA and AD9957

中文摘要英文摘要

随着通信技术的快速发展,通信安全尤其是战时通信安全越来越受到重视。与此同时,各类通信网的建立,使得有限的频率资源更加拥挤,相互之间的干扰更为严重。跳频通信以其极强的抗干扰、抗衰落能力以及良好的保密性,广泛应用于军用通信以及民用通信中。软件无线电技术的发展为超高速跳频的发展提供了可靠的平台,同时极大的增加了跳频系统设计的灵活性。本文利用软件无线电思想与架构,采用FPGA以及AD9957实现了一种基于统一硬件平台的高速跳频发射机,跳频速率125Khops,跳频带宽300Mhz,码元速率5Mbps。

With the development of communication technology, communication security especially Military Communications is received more and more attention. At the same time, the establishment of all kinds of communication network, making limited frequency resource more crowded, and the mutual interference is even more serious. Frequency hopping communication with its strong anti-jamming, anti-fading ability and the good secrecy, widely applied in the military communications and civil communication. The development of software defined radio technology provides reliable platform to super-fast frequency hopping development, and increases the designing flexibility of frequency hopping system greatly. In this paper, applied the architecture of software-defined radio, used Altera FPGA and AD9957, designed a high-speed and broadband frequency hopping transmitter based on the unified hardware architecture. Achieved the frequency hopping rate of 125kHops/s, and bandwidth of 300MHz.

崔一凡、李绍胜、练美英

无线通信军事技术微电子学、集成电路

FPGA高速跳频软件无线电9957

FPGAHigh-speed frequency hoppingSDRAD9957

崔一凡,李绍胜,练美英.基于FPGA及AD9957的高速跳频发射机设计[EB/OL].(2012-01-04)[2025-08-17].http://www.paper.edu.cn/releasepaper/content/201201-56.点此复制

评论