基于Pro/E和ADAMS的齿轮传动箱虚拟样机建模及动力学仿真
Modeling and Dynamic Simulation of Gear Box Virtual Prototype Based on Pro/E and ADAMS
基于三维造型设计软件Pro/E构建大型龙门镗铣床XK2425-600齿轮齿条进给机构的齿轮传动箱参数化模型，通过与机械动力学仿真软件ADAMS的接口MECHANISM/Pro实现数据交换，在ADAMS中建立传动箱虚拟样机模型，对虚拟样机模型进行动力学仿真。得到各轴转速、齿轮啮合力及轴承处所受载荷，可以作为有限元分析软件ANSYS的边界条件，计算箱体的强度、刚度。
Based on Pro/E , a 3D modeling and designing software, established a parametric model of a gear box of the rack and pinion drive mechanism, which is used in large gantry milling machine XK2425-600. The data interface module MECHANISM/Pro is used to convert the Pro/E model data to ADAMS, then the virtual prototype is built in it. The rotational speeds, meshing forces, and reactive loads at bearings are obtained by dynamic simulation of the virtual prototype,which can be used in finite element analysis as boundary condition, helped to calculate the strength and stiffness of the box.
任超
机械设计、机械制图机械零件、传动装置机械制造工艺
齿轮传动箱虚拟样机动力学仿真
gear boxvirtual prototypedynamic simulation
任超.基于Pro/E和ADAMS的齿轮传动箱虚拟样机建模及动力学仿真[EB/OL].(2009-09-25)[2025-08-02].http://www.paper.edu.cn/releasepaper/content/200909-684.点此复制
评论