|国家预印本平台
首页|浮环轴承动力学参数及稳定性研究

浮环轴承动力学参数及稳定性研究

Study of floating bearing dynamics parameters and stability

中文摘要英文摘要

浮环轴承内层油膜承载能力大于外层油膜承载能力,在分析浮环轴承内外层油膜压力时,只分析外层油膜压力即可表现出浮环轴承最大承载能力。本文基于DyRoBes软件和有限差分法分别对外层油膜压力进行了分析,并将结果进行了比较。由于浮环轴承自身结构的特点,使得浮环轴承内外层油膜刚度和阻尼的相互关系等效于弹簧和阻尼的串联,由此可以算出不同转速下的浮环轴承油膜总刚度和总阻尼,利用Routh-Hurwitz判别法分析了对应转速下的油膜稳定性。

In this paper, the capacity of outer oil film of floating-ring bearing was analyzed because the capacity of inner oil film is larger than the outer's. Based on the DyRoBes software and Finite difference method, this paper analyzed the pressure of outer oil film by using the two ways and compared the two results. Because the structure characteristics of floating-ring bearing , the relationship of stiffness and damping of inner and outer films equivalent of the series of spring and damping, this paper calculated the total stiffness and damping of oil film of floating-ring bearing under different speeds. Using the method Routh-Hurwitz criterion analyzed the stability of oil film.

陈照波、张立伟、马文生、焦映厚

机械学机械运行、机械维修工程基础科学

浮环轴承油膜压力刚度阻尼稳定性

Floating-ring bearingPressure of oil filmStiffnessDampingStability

陈照波,张立伟,马文生,焦映厚.浮环轴承动力学参数及稳定性研究[EB/OL].(2011-06-03)[2025-08-28].http://www.paper.edu.cn/releasepaper/content/201106-98.点此复制

评论