煤高效制合成气装置传热特性的模拟研究
Simulation study on heat transfer characteristics of Coal synthesis gas installations
基于Eulerian双流体模型,利用Fluent数值模拟软件针对煤高效制合成气装置进行无化学反应参与的运行状态的模拟,重点讨论在不同的内筒半径(Ri)和外筒半径(Ro)的条件下,气化装置内的温度和空隙率分布情况。经过对理论模型的合理简化,合理的网格划分,利用Fluent成功模拟出该装置运行15s内的温度分布和固体颗粒物分布状态。通过对Fluent数据的分析和比较,最终得出以下结论,在Ro/Ri=2、Ro/Ri=3、Ro/Ri=5三种参数下,分离器内的温度基本达到预热煤所要求的温度900K,且在2<Ro/Ri≤3时,气化部分能够达到较好的气化温度,流化状态最理想。
Based on the Eulerian two-fluid model and with the use of numerical simulation software Fluent, the paper simulate the coal gasification plant’s operation state without chemical reactions involved, and mainly discuss the temperature and the interstice distribution in the coal gasification plant, under the condition of different inner cylinder radius (Ri) and outer cylinder radius (Ro). After reasonably simplifying the theoretical model and rationally dividing the grid, using Fluent (we) successfully obtain the distribution of the temperature and the solid particulate after the plant runs for 15 seconds. Through analysis and comparison of Fluent data, (we) finally conclude that, at the parameters Ro / Ri = 2, Ro / Ri = 3 and Ro / Ri = 5, the temperature inside the separator reaches the required preheating temperature of the coal approximately, and in the 2 <Ro / Ri <3, the plant’s gasification part can achieve a better temperature for gasification and the fluid state is ideal at the same time.
姚翠兰、杨巨生、陈清军、谢克昌、张永发
煤化学、煤的加工利用热力工程、热机
煤气化流化床Fluent两相流模型数值模拟
coal gasificationfluidized bedFluenttwo phase fluid modelnumerical simulation.
姚翠兰,杨巨生,陈清军,谢克昌,张永发.煤高效制合成气装置传热特性的模拟研究[EB/OL].(2010-03-24)[2025-08-21].http://www.paper.edu.cn/releasepaper/content/201003-804.点此复制
评论