常压冷等离子体处理改善杨木单板胶合特性的研究（I）--等离子体改性工艺的影响
Improvement bondability of Poplar veneers by atmospheric pressure dielectric barrier discharge Treatment （I）--The effect of plasma treatment parameters
采用常压介质阻挡放电产生的冷等离子体对杨木单板进行改性处理，研究处理功率、处理速率和处理次数对杨木单板胶合特性的影响，结果表明：常压冷等离子体处理能显著地改善杨木单板的胶合特性。经不同条件常压冷等离子体处理后，杨木胶合板的胶合强度提高幅度为10%~40%。较优的处理条件为：处理功率4.5kW，处理速率14m/min，处理次数：1次。
he improvement bondability of Poplar veneers by atmospheric pressure dielectric barrier discharge (DBD) treatment was investigated in this paper. The effect of processing power, treatment rate and treatment times on the bonding strength of plywood were evaluated. The results show that the treatment can improve the veneer bonding strength remarkably. The improved rate of bonding strength ranges 10%~40%. Optimized processing conditions are as following: processing power:4.5kW, treatment rate : 14m/min and the treatment times: 1.
杨雪慧、汤丽娟、章蓉、陈钊、周晓燕
材料科学胶粘剂工业
常压冷等离子体介质阻挡放电杨木单板胶合特性
atmospheric pressure plasmadielectric barrier dischargepoplar veneerbonding strength
杨雪慧,汤丽娟,章蓉,陈钊,周晓燕.常压冷等离子体处理改善杨木单板胶合特性的研究（I）--等离子体改性工艺的影响[EB/OL].(2013-03-05)[2025-08-16].http://www.paper.edu.cn/releasepaper/content/201303-108.点此复制
评论