恒比定时在激光扫描成像系统中的应用
he Application of Constant Fraction Discriminator in Laser Scanning Imaging System
随着激光成像技术的发展,激光测距在飞行器制导、目标三维重建、地形地貌测量等方面的应用己成为研究的热点。本文介绍了激光测距系统中的一个关键技术--恒比定时技术的原理及应用。并结合工程实践,用LC电路代替传输延迟线,采用TTL电平的比较器以减小功耗;对传统恒比定时方法提出了许多改进,大大提高了定时精度及可靠性,优化了扫描成像的效果。
With the laser imaging technology, laser ranging is used in aircraft guidance, target three-dimensional reconstruction, terrain measurement and so on. Laser ranging has become a research hotspot.This article describes the principle and application of constant fraction discriminator (CFD) which is a key technology in the laser ranging system. Based on engineering practice, LC circuit is designed to replace the transmission delay line to delay the echo signal, and TTL level comparator is used to reduce power consumption. This design makes lots of modifications to the traditional design. This improves the precision and reliability of the timing point to a large extent. This can optimize the imaging results.
赵同刚、李乐坚、任建华
光电子技术电子电路电子技术应用
激光测距恒比定时漂移误差三维成像
laser rangingconstant fraction discriminator(CFD)waIk erorrthree-dimensional imaging
赵同刚,李乐坚,任建华.恒比定时在激光扫描成像系统中的应用[EB/OL].(2011-01-19)[2025-08-21].http://www.paper.edu.cn/releasepaper/content/201101-919.点此复制
评论