|国家预印本平台
首页|坨142断块含水上升影响因素分析及控制措施

坨142断块含水上升影响因素分析及控制措施

he influence factor analysis and the control measure of Tuo142 block’s water cut rise

中文摘要英文摘要

目前坨142断块的综合含水已达74%,采油速度为3.19%,进入了采油速度高、含水上升较快的开发阶段。本文针对T142断块含水上升的影响因素进行了分析,认为导致该断块含水上升加快的主要因素包括层间差异、构造高差等静态因素以及平面压力不均衡、地层压力低、采液强度大等动态因素的影响。针对影响含水上升速度的因素,提出了主要采取提高注采比恢复地层能量和不稳定注水以及堵水调剖等方式减缓断块含水上升速度的对策措施,并取得了一定的效果。

t present the Tuo142 block’s water cut has reached 74%,the rate of oil production is 3.19%, entered the rate of oil production is high, water cut rises a quicker phase of exploitation.This article water cut the rise influence factor in view of the T142 block carries on the analysis, thought causes this block to water cut primary factor which the rise sped up includes strong heterogeneity, structure high inferior static state factor as well as plane pressure is not balanced, formation pressure is low, fluid production intension is big and so on dynamic factor influence. proposed mainly adopted enhances Injection-to-production ratio to restores formation pressure and not stably injects water as well as the water shot-off accent splits and so on the way slows down the block water cut the ascending velocity counter measure measure, and obtained the certain effect.

庞瑞云、刘涛、赵天浩、代永贮

油气田开发

开发 非均质性 构造 地层压力 注采比

develepment,heterogeneity,structure,formation pressure,Injection-to-production ratio

庞瑞云,刘涛,赵天浩,代永贮.坨142断块含水上升影响因素分析及控制措施[EB/OL].(2005-11-25)[2025-08-11].http://www.paper.edu.cn/releasepaper/content/200511-357.点此复制

评论