|国家预印本平台
首页|波节管管程流动与传热的数值仿真

波节管管程流动与传热的数值仿真

Numerical Simulation on Flow and Heat Transfer in Corrugated Tubes

中文摘要英文摘要

本文基于FLUENT软件对三种型号的波节管进行了流动特性和传热特性仿真并与对应基径的光管进行对比。流动特性方面,以2#波节管和光管,入口速度u=1.5m/s为例,分析对比了波节管和光管的压力场、速度场和温度场。对比了3种不同波深D1的波节管波峰内的迹线和速度矢量图,指出涡旋尺寸随着波深的加大而变大;传热特性方面,通过场协同性分析得出波节管的场协同性由于光管。分析了波节管的局部努塞尔数分布,指出最大值出现在波峰下游处。对比不同速度入口下3种波节管和光管的平均努塞尔数,相同条件下波节管的平均Nu数高于波节管。本文最后,对波节管在不同入口速度下进行综合性能评定。

In this paper,based on fluent,flow and heat transfer in three types of corrugated tube was numerically simulated. And we compared the result to the corresponding straight pipe. In the flow characteristics, compare to straight pipe, the pressure field, velocity field and temperature field of 2# corrugated tube were analyzed in the condition that inlet velocity u is 1.5m/s . Besides that, in order to find out the relationship between the vortex size and D1, the path line and velocity vector in the peak of corrugated tube were contrasted among three different kinds of D1. In the heat transfer characteristics, the temperature field and velocity field of 2# corrugated tube and straight pipe were analyzed by field synergy principle in the condition that inlet velocity u is 1.5m/s. Distribution of local Nusselt number in the corrugated tube was analyzed in the condition inlet velocity u is 1.5m/s and point out the max values appear in the downstream of each peak . In addition, average Nusselt number was contrasted among 3 kinds of corrugated tubes. At last, 2# corrugated tube was assessed comprehensively at the different inlet veclocities.

钱作勤、曹应佳

热力工程、热机

波节管FLUENT仿真流动特性传热特性

orrugated TubeFUENT AnalysisFlow CharacteristicsTransfer Characteristics

钱作勤,曹应佳.波节管管程流动与传热的数值仿真[EB/OL].(2011-06-07)[2025-08-16].http://www.paper.edu.cn/releasepaper/content/201106-133.点此复制

评论