K360钢Ni基堆焊焊条的研制
evelopment and Production of K360 steel Ni base surfacing electrode
本文是以K360高强耐磨钢的修复为目的，通过手工搓制法自制了焊接工艺性能良好的堆焊焊条，然后在焊条药皮的基础成分中加入Ni60合金粉末，并适当调节其含量来提高焊缝硬度和耐磨性，并观察其焊接工艺性能。实验结果表明：随着焊条药皮中Ni60合金粉末加入量的增加，堆焊层硬度和耐磨性增加，焊条工艺性能得到改善。
In this paper K360 steel is for the purpose of repairing, through manual manipulation method made a welding electrode with good Welding technicality.Then through the coating of components by adding Ni60 alloying Powder, and adjust their content to improve weld hardness and wear resistance , and observe their performance welding process. Experimental results show : With the coating by adding Ni60 alloying Powder increased, hardness and wear resistance of surfacing layer increased, electrode technology to improve performance.
王艳 、吴世品 、刘少平
焊接、金属切割、金属粘接冶金技术金属学、热处理
堆焊焊条，K360钢，耐磨性
surfacing electrode，K360 steel，wear resistance
王艳 ,吴世品 ,刘少平.K360钢Ni基堆焊焊条的研制[EB/OL].(2007-08-20)[2025-08-19].http://www.paper.edu.cn/releasepaper/content/200708-290.点此复制
评论